Home > Switch Life Tester >

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

Product Categories

Electrical Appliance Testing Equipment [376]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [136]
Battery Testing Equipment [67]
Switch Life Tester [271]
Led Testing Equipment [71]
Water Ingress Testing Equipment [83]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

Name: IEC 603201 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 02 A
Brand: Sinuo
Price: 1 USD

Brand Name : Sinuo

Model Number : SN2104

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : L/C, T/T, Western Union, MoneyGram

Supply Ability : 20 Sets Per Month

Delivery Time : 20 days

Packaging Details : Carton Box

Applied Standard : IEC60320-1

Applied Clause : Clause 23.3

Humidity : 30%-90%

Force Range : 0-100N

Cable Bending Height : 40±2 mm

Pulling Method : Manual operation

Test Station : Single

Working temp. : 5-35℃

Contact Now

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A

Equipment overview:

Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19.

It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler.

Test principle:

Plug a connector rated over 0.2 A into an appliance inlet that corresponds to the type of connector to be tested and complies with the relevant standard table. Appliance input sockets are installed in suitable test equipment, an example is shown in IEC 60320-1 Figure 19 with pins facing up. Should conform to the dimensions of 40 mm ± 2 mm. The lateral pull as specified in IEC 60320-1 Table 7 is first applied to the cord in a direction perpendicular to the plane containing the current-carrying pin axis and then released immediately. This sequence of operations is performed 50 times in one direction, then 50 times in the opposite direction.

Structure:

The connector test should be equipped with an appliance inlet of a type corresponding with the connector to be tested and complying with the relevant standard sheet.

Technical parameters:

Test station	Single station
Flexible cable bending height	40±2 mm,adjustable
Working temperature	5-35℃
Humidity	30%-90%
Pull force range	0-100N
Pulling method	50 times in one direction and then 50 times in the opposite direction
Cable selection and corresponding pull value table
Appliance input socket	Optional gauge according to requirements

Product Tags:

Coupler Lateral Pulling Test Apparatus

IEC 60320-1 Pulling Test Apparatus

IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!